| Press capacity |
Impulse position |
Slider strokes per minute(S.P.M) |
Max mold height |
Slider adjustment amount |
| Ton |
mm |
Swing mode/mm |
Full stroke/mm |
mm |
mm |
| 110 |
5 |
~100 |
~60 |
450 |
100 |
| Slide Area |
Bolster Area |
Side opening |
Servo motor torque |
Air pressure |
Press accuracy grade |
| mm |
mm |
mm |
Nm |
kg*cm² |
Grade |
| 750*700 |
750*800 |
700*500 |
4500 |
6 |
JIS 1 |
| 1 |
Hydraulic overload protection device |
9 |
Air blowing device |
| 2 |
Servo motor(Adjustable speed) |
10 |
Independent control cabinet |
| 3 |
Digital die height indicator |
11 |
Mis-delivery detection device reserved interface |
| 4 |
Slider and mold balance device |
12 |
Photoelectric safety protection device |
| 5 |
Electronic cam switch device |
13 |
Oil-gathering silencer |
| 6 |
Prejudging counter |
14 |
Electric grease lubrication device |
| 7 |
Air source connector |
15 |
Touch (pre-break, prejudge, total count) |
| 8 |
Second falling protection device |
16 |
Air cooled chiller |
| 1 |
Pneumatic mold pad device |
5 |
Feeder (air, mechanical and NC) |
| 2 |
Thin oil lubrication device |
6 |
Leveling machine |
| 3 |
Quick die change device (Die lifter, die clamper or die mover) |
7 |
Rack |
| 4 |
Upper part hit material device of slider |
8 |
Manipulator |
High strength steel frames
with small deformation
The gear shaft is made of high-strength alloy,
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
The gear shaft is made of high-strength alloy,
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
Crankshaft
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel
Ball Seat
Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
Main performance characteristics :
- 9 processing modes are built-in, and each product can select the processing curve most suitable for component processing,So as to achieve high precision, high efficiency and high energy conservation.
- Compared with traditional presses, it has simple structure, high mechanical transmission efficiency and low maintenance cost.
- According to the characteristics of products/materials, the stamping forming speed can be reduced during the material processing to achieve the best forming speed of products/materials. Thus reducing vibration and stamping noise; Improve product accuracy and extend the service life of the mold.
- According to different products, different heights are required. The stroke of the punch can be set arbitrarily, which greatly shortens the stamping time and improves the efficiency.
> Training:
Qiaosen provide complete training for our aboard customers through Internet so that operators, supervisors and maintenance team could know well of operation and maintenance as well as simply trouble shootings.
> Maintenance:
Qiaosen in-house maintenance department are responsible for internet inspection and suggestion immediately. If the remote guidance couldn't solve the issue, we will arrange the professional engineers to the door for maintenance by paid service.
Audited Supplier 
){kind=link}