| Customization: | Available |
|---|---|
| After-sales Service: | on Line Available |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Name | Unit | STD-110sv | STD-160sv | STD-200sv | STD-250sv | STD-300sv | STD-400sv | STD-500sv | STD-600sv | STD-800sv | |
| Press capacity | Ton | 110 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 800 | |
| Impulse position | mm | 5 | 5 | 5 | 6 | 6 | 6 | 7 | 8 | 9 | |
| Slider strokes per minute(S.P.M) | Swing mode | mm | ~100 | ~100 | ~100 | ~75 | ~70 | ~70 | ~70 | ~70 | ~60 |
| Full stroke | mm | ~60 | ~60 | ~60 | ~50 | ~40 | ~40 | ~40 | ~40 | ~35 | |
| Max mold height | mm | 450 | 450 | 450 | 500 | 550 | 600 | 650 | 650 | 650 | |
| Slider adjustment amount | mm | 100 | 100 | 150 | 150 | 150 | 150 | 150 | 150 | 150 | |
| Slide Area | mm | 750*700 | 750*700 | 700*700 | 800*800 | 900*900 | 1000*1000 | 1200*1200 | 1300*1300 | 1400*1400 | |
| Bolster Area | mm | 750*800 | 850*800 | 900*900 | 1000*1000 | 1100*1100 | 1200*1200 | 1400*1200 | 1500*1300 | 1600*1400 | |
| Side opening | mm | 700*500 | 700*500 | 700*500 | 700*600 | 700*600 | 900*650 | 900*650 | 900*700 | 900*700 | |
| Servo motor torque | Nm | 4500 | 7500 | 12000 | 15000 | 21000 | 28000 | 37000 | 46000 | 65000 | |
| Air pressure | kg*cm² | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |
| Press accuracy grade | Grade | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 | |
| NOTE:Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. | |||||||||||
| > | Hydraulic overload protection device | > | Air blowing device |
| > | Manual slider adjustment device (below ST60) | > | Mechanical shockproof feet |
| > | Electric slider adjusting device (above ST80) | > | Mis-feeding detection device reserved interface |
| > | Variable frequency variable speed motor (adjustable speed) | > | Maintenance tools and toolbox |
| > | Mechanical die height indicator (below ST60) | > | Main motor reversing device |
| > | Digital die height indicator (above ST80) | > | Light Curtain (Safety Guarding) |
| > | Slider and stamping tools balance device | > | Power outlet |
| > | Rotating cam controller | > | Electric grease lubrication device |
| > | Crankshaft angle indicator | > | Touch screen (pre-break, pre-load) |
| > | Electromagnetic counter | > | Fixed two-handed operating console |
| > | Air source connector | > | LED die lighting |
| > | Second degree falling protecting device |
| > | Customization Per Customer Requirement | > | T-type movable two handed console |
| > | Die Cushion | > | Re-Circulating Oil lubrication(Above ST-80) |
| > | ST-60 die height electric adjusting device | > | Wet clutch |
| > | Quick Die Change System | > | Anti-Vibration Isolator |
| > | Slide knock out device | > | Tonnage Monitor |
| > | Turnkey System with Coil Feedline and Automation System |
> Training:
Qiaosen provide complete training for our aboard customers through Internet so that operators, supervisors and maintenance team could know well of operation and maintenance as well as simply trouble shootings.
){kind=link}