| Customization: | Available |
|---|---|
| After-sales Service: | on Line Available |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| > | Hydraulic overload protection device | > | Air blowing device |
| > | Servo motor(Adjustable speed) | > | Independent control cabinet |
| > | Digital die height indicator | > | Mis-delivery detection device reserved interface |
| > | Slider and mold balance device | > | Photoelectric safety protection device |
| > | Electronic cam switch device | > | Oil-gathering silencer |
| > | Prejudging counter | > | Electric grease lubrication device |
| > | Air source connector | > | Touch (pre-break, prejudge, total count) |
| > | Second falling protection device | > | Air cooled chiller |
| > | Pneumatic mold pad device | > | Feeder (air, mechanical and NC) |
| > | Thin oil lubrication device | > | Leveling machine |
| > | Quick die change device (Die lifter, die clamper or die mover) |
> | Rack |
| > | Upper part hit material device of slider | > | Manipulator |
| Name | Unit | STC-110sv | STC-160sv | STC-200sv | STC-250sv | STC-315sv |
| Press capacity | Ton | 110 | 160 | 200 | 250 | 315 |
| Impact force location | mm | 4 | 5 | 5 | 5.5 | 6 |
| Slider strokes per minute(S.P.M) | Swing mode | ~100 | ~100 | ~95 | ~70 | ~65 |
| Full stroke | ~50 | ~50 | ~50 | ~40 | ~40 | |
| Slider stroke length | mm | 180 | 200 | 250 | 280 | 280 |
| Max mold height | mm | 400 | 450 | 500 | 550 | 550 |
| Slider adjustment amount | mm | 100 | 100 | 120 | 120 | 120 |
| Slide Area | mm | 1400*500 | 1600*550 | 1850*650 | 2100*700 | 2200*700 |
| Slide Thickness | mm | 70 | 70 | 95 | 95 | 95 |
| Bolster Area | mm | 1800*650 | 2000*760 | 2400*840 | 2700*900 | 2800*900 |
| Bolster Thickness | mm | 130 | 150 | 170 | 170 | 190 |
| Main servo motor torque | Nm | 5000 | 9000 | 12500 | 16000 | 20500 |
| Air pressure | kg*cm² | 6 | 6 | 6 | 6 | 6 |
| Press accuracy grade | Grade | JIS 1 | JIS 1 | JIS 1 | JIS 1 | JIS 1 |
| Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice. | ||||||
| Performance Features | |
| > | High strength frame structure, small deformation and high precision. |
| > | The sliding block adopts double angle hexahedral guide rail, and the sliding block guide rail adopts "high-frequency quenching" and "rail grinding process": low wear, high precision, long precision holding time, and improves the service life of the mold. |
| > | Optional mold pad (air cushion). |
| > | 9 processing modes are built-in, and each product can select the processing curve most suitable for component processing,So as to achieve high precision, high efficiency and high energy conservation. |
| > | Compared with traditional presses, it has simple structure, high mechanical transmission efficiency and low maintenance cost. |
| > | According to the characteristics of products/materials, the stamping forming speed can be reduced during the material processing to achieve the best forming speed of products/materials. Thus reducing vibration and stamping noise; Improve product accuracy and extend the service life of the mold. |
| > | According to different products, different heights are required. The stroke of the punch can be set arbitrarily, which greatly shortens the stamping time and improves the efficiency. |
> Training:
Qiaosen provide complete training for our aboard customers through Internet so that operators, supervisors and maintenance team could know well of operation and maintenance as well as simply trouble shootings.
> Maintenance:
Qiaosen in-house maintenance department are responsible for internet inspection and suggestion immediately. If the remote guidance couldn't solve the issue, we will arrange the professional engineers to the door for maintenance by paid service.
){kind=link}