|
Unit |
STV-60 |
STV80 |
STV110 |
STV160 |
STV200 |
Mode |
|
V-type |
H-type |
V-type |
H-type |
V-type |
H-type |
V-type |
H-type |
V-type |
H-type |
Press capacity |
Ton |
60 |
80 |
110 |
160 |
200 |
Impact force location |
mm |
4 |
2 |
4 |
2 |
6 |
3 |
6 |
3 |
6 |
3 |
Slide strokes per minute |
S.P.M |
35~90 |
80~120 |
35~80 |
80~120 |
30~60 |
60~90 |
20~50 |
40~70 |
20~50 |
50~70 |
Slide stroke length |
mm |
120 |
60 |
150 |
70 |
180 |
80 |
200 |
90 |
200 |
100 |
Max mold height |
mm |
310 |
340 |
340 |
380 |
360 |
410 |
460 |
510 |
460 |
510 |
Slide adjustment amount |
mm |
75 |
80 |
80 |
100 |
110 |
Slide size |
mm |
800*400*70 |
850*420*70 |
900*450*80 |
1000*500*90 |
1100*600*100 |
Bolster size |
mm |
1000*400*100 |
1050*420*115 |
1100*450*135 |
1300*500*150 |
1400*600*170 |
Slide center to machine distance |
mm |
255 |
280 |
305 |
405 |
415 |
Main motor power |
KW*P |
7.5*4 |
11*4 |
15*4 |
18.5*4 |
22*4 |
Slide adjust device |
/ |
|
Electric |
Air pressure |
kg*cm² |
6 |
6 |
6 |
6 |
6Name |
Press accuracy grade |
Grade |
JIS 1 |
JIS 1 |
JIS 1 |
JIS 1 |
JIS 1 |
1 |
Hydraulic overload protection device |
12 |
Two-degree fall protection device |
2 |
Maintenance tools and tool box |
13 |
Air blowing device |
3 |
Electric slider adjusting device |
14 |
Mechanical shockproof feet |
4 |
Variable frequency variable speed motor (adjustable speed) |
15 |
Reserved interface for wrong delivery detection device |
5 |
Mechanical quakeproof foot |
16 |
Maintenance tools and toolbox |
6 |
Digital mold height indicator |
17 |
Main motor reversing device |
7 |
Slider and mold balance device |
18 |
Photoelectric safety protection device |
8 |
Rotating cam controller |
19 |
Power outlet |
9 |
Crankshaft angle indicator |
20 |
Electric grease lubrication device |
10 |
Electromagnetic counter |
21 |
Touch screen (pre-break, pre-load) |
11 |
Air source connector |
|
1 |
Pneumatic mold pad device |
7 |
Leveling machine |
2 |
Wet clutch |
8 |
Manipulator |
3 |
Quick die change device (Die lifter, die clamper or die mover) |
9 |
Rack |
4 |
Mobile two handed console |
10 |
Thin oil lubrication device |
5 |
Upper part hit material device of slider |
11 |
Foot switch |
6 |
Feeder (air, mechanical and NC) |
|
High strength steel frames
with small deformation
Slide rail adopt high frequency quenching technology,
its hardness could reach HRC45 degree or more.
Advantage: perfect wear resistance
The gear shaft is made of high-strength alloy,
all tooth surfaces are treated with medium frequency
Advantage: small wear, high accuracy,long service life
Crankshaft
Alloy 42 CrMo Material
Advantage: 1.3 times Stronger than 45 steel
Ball Seat
Japanese grade TM-3 sintered copper alloy
Advantage: less failure rate with sawtooth ball
Features
- The press frame is composed of three parts (cover, middle platform body, and base), and finally connected with a reinforcing rod to form a solid lock.
- The frame and slider have high rigidity (deformation) of 1/9000: small deformation and long accuracy retention time.
- Presses below 600 tons use pneumatic wet clutch brakes (unibody), while presses above 800 tons use dry clutch brakes (split-type).
- The slider adopts 8-points slide guiding, which can bear large eccentric loads, ensuring long-term and stable maintenance of stamping accuracy.
- The slide rail adopts the "high-frequency quenching" and "rail grinding process": low wear, high precision, long accuracy retention time, and improved mold service life.
- Adopting a forced thin oil circulation lubrication device: energy-saving, environmentally friendly, equipped with automatic alarm function, which can increase the stamping frequency by adjusting the oil volume.
- The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life.
- The copper sleeve adopts tin phosphorus bronze ZQSn10-1, which has a strength 1.5 times higher than ordinary BC6 brass. It adopts a highly sensitive hydraulic overload protection device, which can effectively protect the service life of the punching machine and mold.
- Standard Japanese SMC pressure regulating valve, oil mist filter, and air filter.
- Standard configuration: German Siemens touch screen and Siemens motor.
- Optional die cushion.
- Optional Moving bolster
> Training:
Qiaosen provide complete training for our aboard customers through Internet so that operators, supervisors and maintenance team could know well of operation and maintenance as well as simply trouble shootings.
> Maintenance:
Qiaosen in-house maintenance department are responsible for internet inspection and suggestion immediately. If the remote guidance couldn't solve the issue, we will arrange the professional engineers to the door for maintenance by paid service.